Need help?Do you have a question about the Sanyo TP X2 and is the answer not in the manual?
General| Drive method | Belt drive |
|---|---|
| Motor | DC motor |
| Effective length | 220mm |
| Overhang | 16mm |
| Output | 2.5mV |
| Speeds | 33 1/3, 45 rpm |
| Tonearm | Static balance type |
| Platter | 300mm |
| Cartridge | Moving magnet type |
| Power Supply | AC 120V, 60Hz |
| Cartridge weight range | 4 to 10g |
Details Sanyo's warranty for parts and labor for turntables.
Outlines owner's duties and limitations of the warranty.
Section for recording personal product information for protection.
Provides an overview of the Sanyo TP X2 turntable's features and purpose.
Lists essential safety precautions for using the turntable safely.
Instructions for unpacking the unit and placing it correctly.
Guides on attaching the drive belt and turntable platter.
Details on connecting the colored leads from the cartridge shell to the cartridge.
Steps for attaching the cartridge and adjusting overhang using a gauge.
How to adjust the tone arm lifter height for proper stylus clearance.
Setting the anti-skating control to match stylus pressure force.
Correcting the stylus position on the lead-in groove.
Adjusting tone arm balance and setting stylus pressure force.
Instructions for installing the dust cover.
Step-by-step guide for automatic record playback.
Instructions for playing records using manual control.
Advice on what to do if the unit encounters problems.
How to clean the turntable and its stylus properly.
To Next Page
