Sanyo TP1010UM - User Manual

SERVICE
MANUAL
STEREO TURNTABLE
TP1010UM Ack
(EUROPE)
SPECIFICATIONS
Motor PLL servomotor (TP 1010) Cartridge Magnetic stereo cartridge: (MG-10J)
Drive system Belt drive Stylus 0.5 mil diamond stylus: (ST-10J)
Speeds 33-1/3 and 45 rpm Stylus pressure 1.5—2.5g.
Speed control range Individual controls: +4% Frequency responce 20 — 20,000 Hz
Speed change Electronic type Overhang 15 mm
Wow & flutter 0.05% WRMS Channel separation Better than 25 dB
Signal to noise ratio Better than 60dB Power source AC: 110/125/220V 50Hz
Turntable platter 12” (30.5 cm) Power consumption 7W
1 Ibs. 5 ozs. (0.6kg) Dimensions Approx: 17-1/2’"(W) x 5- 5/8”(H) x
Tone
arm
Static-balance
type
14-1/4"'(D)
Tracking error +1,5° (440 x 140 x 360 mm)
Tracking force range O-—4g. Weight Approx. 10 Ibs. 2 ozs. (4.6 kg)
* Specifications and design are subject to change without notice.
WM- 3157

Sanyo TP1010UM Specifications

General

Drive method	Belt Drive
Output	2.5mV
Power Supply	AC 120V, 60Hz
Tonearm type	Static balance type
Platter	300mm
Speeds	33 1/3 and 45rpm
Cartridge weight range	4 to 8g

Summary

Specifications

Tonearm and Auto-Return Adjustments

Tonearm Lever Adjustment

Procedure to set tonearm lever by adjusting set screw for proper micro-switch contact.

Micro-switch Adjustment

Adjusting micro-switch position for correct operation when tonearm moves towards center.

Auto-Return Adjustment

Setting auto-return mechanism to engage at specific point from turntable center.

Headshell Adjustment

Ensuring headshell is not inclined and stylus is perpendicular to record surface.

Lifter and Speed Adjustments

Tonearm Lifter Adjustment

Setting cuing lever UP and distance between stylus/record to approx. 9mm.

Lift-Up Lever Spring Adjustment

Adjusting spring tension for 11mm clearance between stylus/record after auto-return.

Turntable Speed Adjustment

Adjusting fine speed control dials so strobe marks appear stationary at selected speed.

Cabinet Exploded View

Main Parts List

Mechanism Exploded View

Turntable Mechanism Parts List

Schematic and Wiring Diagrams