(Changing the programmed details)
1. Press the MEMORY switch in the stop mode and
display the part of the programme which is to be
changed.
2. Select the new disc and its track.
3. Press the MEMORY switch.
Note:
Programmed details cannot be partially deleted or in-
serted.
Operations during programmed play
- When the !44 or PM switch is used, skip play is
possible following the programmed sequence. (Tracks
cannot be selected directly using the O-9 and +10
switches.)
If the search function is used during programmed
play and the end or beginning of the current track is
reached, the unit enters pause mode.
Disco party function
During CD play, taped sound will be heard automatically
instead of CD when accessing track or changing disc or
when CD sound is interrupted at the between tracks.
Load the cassette tape(s) to be played.
Z. Select “CD” as the function.
3. Press the DISCO PARTY switch. The DISCO PARTY
indicator lights. (This switch can be pressed during
CD play.)
4. Press the PLAY/PAUSE switch. Tape playback oc-
curs during access to the CD track to be played first,
and then CD play starts.
(If no cassette tape is loaded, “TUNER” function is
selected during access to the CD track, but radio
sound will not be heard.)
- To stop disco party function, press the STOP switch
of CD player.
- Forrecording indiscopartyfunction, pressthe DISCO
PARTY switch in stop mode, and press the COM-
PUTER REC switch. In this case, tape will not be
played. So CD tracks will be continuously recorded
without unrecorded blanks between tracks.
_.
BEFORE TAPE OPERATION
Types of usable tapes
The type of tape used is automatically identified by the
system since decks 1 and 2 both employ an auto tape
selection system. The following 2 types of tape can be
used with this system.
Normal
.
Cr02
Note:
- Cr02 tapes without sensing holes cannot be used
since they cannot be identified by the auto selector.
- Endless tapes cannot be used.
- If a tape with one of its tabs already broken out is
recorded, the tape will not be reversed automatically,
and it will stop.
- Do not use C-120 tapes. They may jam the head
section.
Accidental erasure prevention tabs (for protecting
valuable recordings)
Accidental erasure can be prevented by breaking out
the tabs on the end of the cassette tape (where the tape
is not exposed) using a screwdriver or similar implement
(Fig. 12),
If a tab is broken out in error and you wish to re-record
the tape, simply block up the tab hole using cellophane
tape and the tape can be used for recording again.
Dolby NR system
Dolby Noise Reduction circuitry provides superior re-
cording and playback results by suppressing tape hiss
by up to 10 dB for virtually noise free recordings.
Dolby noise reduction manufactured under license from
Dolby Laboratories Licensing Corporation.
“DOLBY” and the double-D symbol
❑0 are trademarks
of Dolby Laboratories Licensing Corporation.
LISTENING TO TAPES
Deck 1 is for playback only; deck 2 is for both playback
and recording. Both are auto reverse decks.
1.
2.
3.
4,
5.
6.
Press the EJECT button to open the cassette holder.
Load the cassette tape.
To load, place the tape with its exposed end at the
bottom. After the tape has been loaded, push the
cassette holder back into position.
Both 4 and ➤ indicators light, and 1 or 2 DECK
indicator lights.
Set the DOLBY NR switch to ON or OFF according to
whether the tape has been recorded with the Dolby
NR system or not.
Select the deck 1 or deck 2 by pressing the DECK
select switch if required.
Playback commences when the PIAY ➤ or 4 PLAY
switch is pressed. The selected
➤ or < indicator
remains lit.
Press the STOP switch to stop playback at any time.
When the end of the tape has been reached, the
automatic stop or automatic reverse will be activated.
Auto reverse
In both decks 1 and 2 tapes can be played back in the
following 3 ways using the MODE switch.
—.
—.
For listening to one side of the tape only.
2:
For listening to both sides of the tape in succession.
However, if playback has been started from the re-
verse side, only the reverse side will be played back.
rJ :
For listening repeatedly to both sides of the tape.
-14-
To Next Page
Loading...
