Sanyo VM-EX280P User Manual

3-8. REMOVAL OF CAMERA LENS BLOCK, CP2
BOARD AND MICROPHONE UNIT
1.
Remove the FPC 0, and then while pushing the hooks
[ For VM-EX220P ]
(A), remove the CP2 board Q.
4. Remove the screw o, and then remove the microphone
2. Remove the three screws o, and then remove the lens
holder Q and ~ , microphone Q , AD2 board (&$and
holder Q and front cover assembly o from the camera
microphone pad ~.
lens block (6).
[ For VM-EX280P, VM-EX370P ]
3. Remove the two screws o, and then remove the cover
4. Remove the screw (Q), and then remove the microphone
shoe o and the accessory shoe O from the front cabinet
holder Q and o, two microphones 0, AD2 board o and
@.
microphone pad ~.
Note: For detailed information on how to remove the
components, please refer to the “Parts List” manual.
““””IK!!4i u ‘AD2b0ard
/
Q Lens holder
“~s2x5
(#99)
– 3-8

Sanyo VM-EX280P Specifications

General

Brand	Sanyo
Model	VM-EX280P
Category	Camcorder
Language	English