Sanyo VPC-CG11W - Page 13

- 13 -
1. LCD is opened.
2. Screw 1.7 x 2
3. Cover battery is opened.
4. Screw 1.7 x 3.5
5. Screw 1.7 x 5
6. Screw 1.7 x 5
7. Cabinet top
8. Two screws 1.7 x 3.5
9. Screw 1.7 x 3.5
10. Screw 1.7 x 5
11. Screw 1.7 x 5
12. Cabinet left
13. Holder lens
14. Heat sink tape left
15. Cover battery
16. Cover bat inner
17. Spacer cover batt
18. Heat sink rub heat L
19. Screw 1.7 x 2
20. Two screws 1.7 x 5
21. Screw 1.7 x 5
22. Screw 1.7 x 3.5
23. Cabinet middle
24. Screw 1.7 x 3.5
25. Stand
26. Spacer cabi mid
27. Cover HDMI
28. Spacer ST1 B
29. ST1 board
30. Connector
31. Screw 1.7 x 5
32. Earth HDMI
33. Cabinet front
34. Two screws 1.7 x 3.5
35. Remove the solder.
36. Remove the solder.
37. Assy, lamp
38. Trans, step up
39. Screw 1.4 x 2
40. Dec front
41. Heat sink left
42. Spacer CA1 CN
43. FPC
44. Spacer CP1 lens
45. FPC
46. Lens
47. Spacer lens
48. Spacer FPC lens