English 90
NORMAL/SHOOTING
Focus range setting
How to use the manual focus
1 Select -, and press the SET
button.
h The focus distance adjustment
bar appears.
2 Toggle the SET button to the left
or right to adjust the focus
distance, and press the SET
button.
h The focus distance is set, and
you are returned to the
Recording Screen.
HINT
About the focus range
i The focus distance indication shows the distance between the center of
the lens and the subject.
i In some cases there may be a slight variance between the distance
(numerical figure) you set in the manual focus mode and the actual
distance.
About zoom movement when using the manual focus
i If the focus distance is set to 70 cm (27.56 in.) or less, the zoom changes
to the largest setting that is suitable for that focus distance.
i When the focus distance is set to 70 cm (27.56 in.) or less, the zoom will
function only within the range at which the image is focused.
About the super macro mode
i When the focus range is set to super macro +, the zoom is temporarily
set to the wide end.
i By assigning an operation shortcut to the SET button (pages 124 and
127), you can change the focus range setting from the Recording Screen.
7112
001:00:05
7112
001:00:05
2.0
m
Full-HD
14
M
-
S
To Next Page
Loading...
Need help?
General