Using your SANYO VCR
Full details of the functions are shown in the Instruction Manual.
1 Press MENU, and press
DD
or
EE
to select the CLOCK menu,
then press ENTER.
SETTING THE CLOCK: You must set the date and time for timer recording.
PLAYING A TAPE
PREPARATION
1 Turn on the power
of both the VCR
and TV.
2 Be sure the TV is
set to the VCR
Output Channel
(CH 3 or 4).
3 If a direct VIDEO/
AUDIO connection
is made between
the VCR and the
TV, set the TV’s
source selector to
VIDEO.
1 Insert a prere-
corded video
cassette.
2 Press PLAY to
play back the
tape.
To make
a picture still
To search at
high speed
To play back at
slow speed
To fast-forward or
rewind the tape
To eject the
cassette
Press PAUSE
during playback.
To play frame-by-
frame, press PAUSE
repeatedly during
still.
If a tape without a
safety tab is inserted
the unit will start the
playback automati-
cally.
Press FF or REW
during playback.
Press SLOW
during playback.
Press FF or REW
during stop.
To return to the
playback mode,
press PLAY.
To return to the
playback mode,
press PLAY.
To return to the
playback mode,
press PLAY.
Press EJECT.
JUL 5 , MON 2:15 AM
TV SCREEN
2 Set the “AUTO CLOCK SET”
item to “ON” and set the
“DAYLIGHT SAVINGS” and
“TIME ZONE” if necessary.
There are cases that TV station
does not send or send wrong
date and/or time information
and VCR set the incorrect time
accordingly.
In this case we recommend that
you set the clock manually.
You can view the clock on the TV screen.
Normally this screen is not displayed. If
you want to display this screen, press
ENTER. (Please refer to page 6.)
3 Press MENU and turn off the
VCR.
The auto clock setting will starts.
P/N: (8)3840R-Q003W-(1E12/03) Printed in Indonesia
To Previous Page
Loading...
Need help?
General
