Sanyo Xacti VPC-C1EX - Page 153

English
150
Shoot-
ing
Why does the
multi-indicator
light red?
Recorded data is being
saved on the card.
Not a malfunction.
Wait until the multi-
indicator turns off.
Why doesn’t the
flash operate?
The camera has
determined that the
image is bright enough
and the flash is not
necessary.
Not a malfunction.
Capture the image; the
camera will determine
when the flash is
necessary.
Are the settings
retained even
after the camera
is turned off?
—
All settings except the
self-timer and the
exposure correction
are retained even after
the camera is turned
off.
Which resolution
setting should I
use?
—
Select the resolution
setting according to the
intended use:
Y: Appropriate for
printing letter-size or
larger, and for printing
a close-up of part of a
photo (trimming).
Z: For printing
standard photo (photo
service) sizes.
[: For photos
displayed on a web
page, or sent as e-mail
attachments.
Question Cause Action
 &*     !"#