Sanyo Xacti VPC-CG10 - Viewing Images; Access Playback Mode; Select Image to Play Back; Playback Selected Image

r
STEP 3 STEP 4
L _
VIEWING IMAGES DELETING IMAGES
_ A
rU
Press the REC/PLAY
button.
•The last recorded
image is displayed.
Select the image to
play back.
•Toggle the SET button
left, right, up or down
to move the orange
frame to the file you
wish to play back.
Press the SET button.
•The image you
selected in step 2 is
displayed fullscreen.
If a video clip was
selected, playback
begins.
Display the image
that you want to
delete.
Toggle the SET
button up.
•The Confirm Delete
Screen appears.
Select “DELETE”,
and press the SET
button.
•The current image
is deleted.
•To return to the
Playback Screen,
select “EXIT”, and
press the SET
button.
Did your photos turn out the way you hoped?
Even if you make a mistake, it’s easy to delete the
pictures you aren’t satisfied with. Unlike film cameras,
with a dual camera you can take all the photos you
want, keep the ones you like and delete the rest.
PREPARE THE BATTERY PACK ■ INSERT THE CARD
Charge the battery pack
Use the supplied charger to charge the battery
pack.
The CHARGE indicator shows the battery pack charge status.
• Lights red during recharging.
• Turns off when battery pack is fully charged.
• The charging time is approx. 120 minutes.
Insert the battery pack
While pressing, push
towards the bottom.
(2) Open
Battery cover
Co nnector ma rkings
(r Ae °° i)
Insert by
matching the
connector
markings
• An SD Memory Card is not included with your
camera. Please purchase a commercially sold
card.
• In this manual, the SD Memory Card is
referred to as the “card”.
(D Open