Why Sanyo Xacti VPC-FH1 Camcorder has no power?
Your Sanyo Camcorder might not be powering on because the battery pack is dead, not correctly inserted, or too hot. Recharge or replace the battery, ensure it's correctly inserted, or allow it to cool down. The power save function might also be on, so try turning the camera on again.
What to do if the flash does not operate on my Sanyo Xacti VPC-FH1 Camcorder?
If the flash on your Sanyo camcorder isn't working, it could be due to the flash being turned off in settings, or the battery pack may be low. Set the flash to automatic or forced flash mode. If that doesn't work, recharge or replace the battery pack, or connect the AC adapter.
Why is my Sanyo Camcorder image too dark?
If your Sanyo Camcorder images are too dark, the flash may have been blocked, the subject may have been too far away or lit from behind, or there may not be enough light. Ensure nothing is blocking the flash, move closer to the subject, use forced flash mode, adjust the ISO sensitivity setting, use the exposure compensation function, or use the spot light-measuring mode.
What to do if my Sanyo Xacti VPC-FH1 Camcorder image is too bright?
If your Sanyo camcorder images are too bright, the forced flash mode may be selected, the subject may have been too bright or too close, or the ISO sensitivity setting may be incorrect. Try selecting a different flash mode, using the exposure compensation function, setting the ISO sensitivity to =, capturing the image with the subject within the photographable range, selecting the correct focus setting, holding the camera correctly and slowly pressing the [ ] button halfway to lock the focus, then press the [ ] button all the way to capture the image or cleaning the lens.
What to do if my Sanyo Xacti VPC-FH1 doesn't capture an image when pressing the button?
If your Sanyo Camcorder isn't capturing images when you press the button, ensure the power is on. If the power save function was activated, turn on the camera before shooting. If the camera was turned off, press the ON/ OFF button to turn it on. Also, check if you've reached the maximum number of images or video recording time; if so, install a new card or delete unnecessary images.
Why Sanyo Xacti VPC-FH1 digital zoom does not work?
The digital zoom on your Sanyo Camcorder might not work if the still image is set to I, or if the digital zoom setting is set to “OFF”. Set the still image to U or lower, or set the digital zoom setting to “ON”.
Why does my Sanyo Xacti VPC-FH1 emit a warning tone and prevent self-timer use?
A warning tone (beep-beep-beep) and the inability to use the self-timer on your Sanyo Camcorder indicate that the battery pack is low. Recharge or replace the battery pack, or connect the AC adapter.
How to fix noise in captured images with my Sanyo Camcorder?
Noise in captured images with your Sanyo Camcorder can be caused by a high ISO sensitivity setting. Try setting the ISO sensitivity to a lower setting.
Why does the 'No card' message appear on my Sanyo Xacti VPC-FH1 Camcorder?
The 'No card' message appears on your Sanyo Camcorder because no card is inserted. Turn off the power and insert a card.
Why is there no color or is the image distorted on my Sanyo Camcorder?
If there is no color in the image or the image is distorted on your Sanyo Camcorder, the TV output setting may not be correct, both the dedicated S-AV interface cable and the dedicated component cable may be connected, the camera may not be correctly connected to the TV, or the TV input may not be set correctly. Select the correct TV output setting, make the correct connection, follow the instructions to make the connection correctly, or set the input on the TV to 'VIDEO' or 'HDMI'.
General| Video Resolution | 1920 x 1080 |
|---|---|
| Sensor Type | CMOS |
| Optical Zoom | 5x |
| Storage | SD/SDHC memory card |
| Lens | Sanyo Lens |
| Aperture | F3.5 - F3.7 |
| LCD Resolution | 230, 000 pixels |
| Video Format | MPEG-4 AVC/H.264 |
| Image Format | JPEG |
| Display | 2.7 inch LCD |
| Effective Pixels | 8.0 megapixels |
| Battery Type | Lithium-ion |
| Image Sensor | 1/2.33-inch CMOS |
To Next Page
