CONNECTING TO A COMPUTER
English 154
Obtaining the software
For Windows operating systems
1 Remove the card from the camera.
h The program to access the website is stored in your camera’s internal
memory. This program cannot be accessed while a card is installed in
the camera.
2 Start your computer, and use the supplied dedicated USB interface
cable to connect your camera to the computer.
h Connect the camera’s USB/AV terminal to the computer’s USB
connector.
3 Turn on your camera (page 30).
h The USB Connection Screen appears on the camera’s monitor.
OK
CANCEL
USB CONNECTION
CANCEL
PRINTER
COMPUTER
To USB connector
Supplied dedicated
USB interface cable
To the USB/AV terminal
To Next Page
Loading...
