English 32
Capturing sequential shots
1 Set the camera to the sequential shots shooting mode (see page 29).
2 Press the shutter release button to capture the sequential shots.
h Images are captured as long as the shutter release button is pressed.
h During shooting, appears in the LCD monitor.
3 Finish capturing images.
h Release the shutter release button to end recording.
About the maximum number of sequential shots
The maximum number of sequential shots varies depending on the resolution
and compression settings.
NOTE
About the focus during sequential shots shooting
i In sequential shots shooting, the autofocus function is activated when the
shutter release button is pressed halfway and remains fixed at the same
focus until the sequential shots are finished.
Resolution setting
ml
Compression
setting
Maximum number
of sequential
shots
Not available 3 4 4 4
To Next Page
Loading...
