Upper limit and lower limit frequency setting, frequency hopping operation, reversal
running restraint, slip frequency compensation, RS485 communication, frequency control of
progressive increase and decrease, failure recovery automatically, etc.
Output frequency, output current, output voltage, motor speed, set frequency, module
temperature, PID setting, feedback, analog input and output.
The latest 6 faults record; running parameters record when the latest fault tripping
happens including output frequency, set frequency, output current, output voltage, DC
voltage4 and module temperature.
Overcurrent, overvoltage, undervoltage, module fault, electric thermal relay, overheat,
short circuit, default phase of input and output, motor parameter adjustment abnormality,
internal memory fault, etc.
-10℃~+40℃ (please run the VFD in derated capacity when ambient temperature is 40℃
~50℃)
5%~95%RH, without condensing drops
Indoors (without direct sunlight, corrosive or flammable gas, oil fog and dust)
Running in derated capacity above 1000m, derate 10% for every 1000m rise.
Air cooling with fan control
Wall-hanging type, cabinet type
To Next Page
Loading...
