SANYU SY5000 Series - F7 Group: Digital Input;Output Parameters; Input Terminal Functions (X1-X7)

61
function NO.58)
2：reverse run（REV）
3：three-wire running control
4：forward jog control
5：reverse jog control
6：free shutdown control
7 ： external reset signal
input(RST)
8：external fault normally-open
input
9：external fault normally-close
input
10： emergency stop function
（brake with ）
11：reserved
12：freq. increase
13：freq. decrease
14： UP/DOWN terminal freq.
zero clearing
15：multi-speed 1
F7.01
Input X2 function
(when F8.21 is
non-zero, default as
function NO.59)
1
2
×
F7.02
Input X3 function
(when F8.21 is
non-zero, default as
function NO.60)
1
4
×