EasyManua.ls Logo

SAP TC Series - Description, Technical Features, and Installation; Overall Dimensions; Packing and Unpacking Guide; Installation Area Requirements

SAP TC Series
69 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 21 -
English language
EN




 
60 cm 44 cm
35 cm 28 cm
55 cm 48 cm

The machine will come packaged in a carton with foamed
polyester inserts to guarantee perfect safety during
transport.
Handle the carton in compliance with the instruction.
Open the carton and make sure that all components are
intact. Keep the carton for any future machine removal.
Lift the machine according to the instructions and place
it in its selected setting for installation.

The selected machine work setting must be sufciently lit and have an electric power outlet. The
worktop must be sufciently large, perfectly level and dry.
The machine should be installed in non-explosive environments. In any case, installation should
be carried out by taking into account any applicable industrial safety regulations in force.
Environmental Condition table
 
Working temperature 0÷35 °C (32÷95 °F)
Storage temperature -15 a +65 °C (da -6.8 a +149 °F)
Relative humidity
Maximum 80% at an ambient temperature of 20°C
Maximum 50% at an ambient temperature of 20÷60 °C
Ambient dust Lower than a 0.03 g/m
3

Table of Contents