8
ENGLISH
Last updated 14.02.2019 www.saphe.dk
If Saphe Drive cannot connect, this may be because either the Bluetooth, GPS or data connection
have not been available. If this is the case, then you can read more about the error in the app.
GPS/Location services
On an iPhone, it is important that the Location service for Saphe Link 2 is set to “Always”. This means
that the app is always allowed to turn on the GPS, but it only does so while you are driving. If you
choose “While using”, then Saphe Link 2 will only work if you turn on the app and keep the screen
turned on during your drive.
Check GPS
We recommend using Google Maps to see whether your GPS works. Both the location and the accu-
racy must be correct. The accuracy is viewed as a radius on the transparent circle that surrounds your
location. The accuracy should be less than 50 metres, and preferably 10 - 20 metres.
Saphe Drive is searching for
GPS.
Saphe Drive is searching for
data connection.
Saphe Drive is searching for
Bluetooth.
To Next Page
Loading...