Sapling SAL Series - Wall Mount Installation - Round Aluminum or Wood Clock - Locally Powered; Included in Package

19
The Sapling Company, Inc.
670 Louis Drive
Warminster, PA 18974
USA
P. (+1) 215.322.6063
F. (+1) 215.322.8498
www.sapling-inc.com
Wall Mount Installation - Round Aluminum or Wood Clock - Locally Powered
Power/grounding wires
and connector
#8x1.5 Self-tapping screw
Wall anchor
1
2
2
Mounting Piece
Release lever
#6-19x7/16 screw
Strain Relief
1
1
2
1
Description
Round SlimLine analog clock with
aluminum/wood rim
Quantity
1
Picture
PLEASE NOTE: A user will also have to provide a Phillips-head screwdriver, a small flat-blade screwdriver, a drill with a 1/4 inch drill bit, a pencil, a single
gang box, any equipment needed to install the gang box, and any additional wiring needed to extend the power or ground cables.
If any of the items listed in the wiring kit are missing, you may contact your dealer and order a replacement kit.
Included in Package
Included in Mounting Kit (A-SLM-MK-AW)
Included in Wiring Kit (A-WK-MTG-1V)
VERY IMPORTANT:
INSTALL, POWER, AND SET YOUR MASTER CLOCK OR REPEATER BEFORE POWERING THE SECONDARY
WIRELESS CLOCKS
A Wireless Master Clock and any Repeaters must be installed, powered, and set up BEFORE you attempt to set up a wireless clock system. If
the Master Clock and Repeaters are not properly installed and powered, the secondary clocks will not synchronize.
Included in Gang Box Kit (A-GB-MK-1)
#6-32x1 screw
#6-19x3/8 screw
2
1 (not used)