10
How to Start up the B 120S
Install the components
(3-1)
in the weighing chamber one at a
time in the order indicated.
Your balance is powered by an AC adapter.
Make sure that the voltage rating printed on this unit is identical
to your local line voltage rating.
Plug the cord of the AC adapter into the power receptacle. Se-
cure the connection by tightening the knurled collar. Now plug
the AC adapter into an electrical or wall outlet.
At the point of use, level the balance using the leveling feet
(10)
so that the air bubble is centered within the circle of the level in-
dicator
(9)
.
To Next Page
Loading...
Need help?
General