11
How to Start up the
B 310P and B 310S
Attach the dust cover by pressing down on the adhesive disks,
and install the components
(7, 6, 1, 5 and 4)
one at a time on
the balance in the order given.
Your balance is powered by an AC adapter.
Make sure that the voltage rating printed on this unit is identical
to your local line voltage rating.
Plug the cord of the AG adapter into the power receptacle of the
balance. Now plug the AC adapter into an electrical or wall out-
let.
At the point of use, level the balance using the leveling feet
(10)
so that the air bubble is centered within the circle of the level in-
dicator
(9)
.
To Next Page
Loading...
Need help?
General