= Setting/function available on Combics 1 plus only
= Setting/function available on Combics 2 only
= Setting/function available on Combics 1 plus and Combics 2 only
First level display 2nd level display Function
Menu
appl Select and configure application programs
W Basic Weighing Function
Z Counting
Z nm Neutral Measurement
V Averaging (Animal Weighing)
O Checkweighing
O cl Classification
L Weighing in Percent
R Net-Total Formulation
Σ Totalizing
Fn-key Define the function of k
off No function
gro net Gross/net toggling
2.unit Show 2nd weight unit
res 10 10-fold increased resolution
Setup Adapt Combics to user requirements
wp1 Settings for weighing instrument on WP1
com1 Settings for the RS-232 interface
UNICOM Settings for the optional second interface
ctrl in Set the function of the universal input (control line)
barcode Set the bar code scanner function
prtpro Settings for the printout
Utilit Settings for additional functions
time Set the time
Date Set the date
code Enter a password to protect menu settings
Info View device-specific information (service date, serial number, etc.)
Lang Select language for calibration, adjustment and GMP printouts
deutsch German
english English
us mode English with U.S. date/time format
franc French
ital Italian
espanol Spanish
54
Configuration
Operating Menu Overview
You can configure the Combics to meet
individual requirements by entering user
data and setting selected parameters
in the operating menu.
The operating menu is a combination
of text levels and numeric codes.
To Next Page
Loading...