appl
Z nm Neutral Measurement
3. 5. Minimum Load for Automatic Taring and Automatic Printing
Numeric menu as for Weighing
3. 6. Minimum Load for Initialization
Numeric menu as for Counting
3. 7. Automatic Taring: 1st Weight Tared
3. 7. 1 * Off
3. 7. 2 On
3. 8. Start Application with Most Recent Application Data when Combics is Switched On
3. 8. 1 Automatic (on)
3. 8. 2 * Manual (off)
3. 9. Resolution for Calculation of Reference Value
3. 9. 1 * Display resolution
3. 9. 2 Display resolution + 1 decimal place
3. 9. 3 Display resolution + 2 decimal places
3. 9. 4 Internal resolution
3.10. Decimal Places for Display of Results
3.10. 1 * None
3.10. 2 1 decimal place
3.10. 3 2 decimal places
3.10. 4 3 decimal places
3.11. Storage Parameter
3.11. 1 * At stability
3.11. 2 At increased stability
3.13. Reference Weighing Instrument
3.13. 1 * Off
3.13. 2 To weighing instrument WP1
3.13. 3 To weighing instrument WP2
9. 1. Factory Settings for All Application Programs
9. 1. 1 Yes
9. 1. 2 * No
V Averaging (Animal Weighing)
3. 5. Minimum Load for Automatic Taring and Automatic Printing
Numeric menu as for Weighing
3. 6. Minimum Load for Automatic Start
Numeric menu as for Counting
3. 7. Automatic Taring: 1st Weight Tared
3. 7. 1 * Off
3. 7. 2 On
3. 8. Start Application with Most Recent Application Data when Combics is Switched On
3. 8. 1 Automatic (on)
3. 8. 2 * Manual (off)
3.18. Start of Averaging Routine
3.18. 1 * Manual
3.18. 2 Automatic
3.19. Animal Activity
3.19. 1 0.1 % of the animal/object
3.19. 2 * 0.2% of the animal/object
3.19. 3 0.5 % of the animal/object
3.19. 4 1% of the animal/object
3.19. 5 2% of the animal/object
3.19. 6 5% of the animal/object
3.19. 7 10% of the animal/object
3.19. 8 20% of the animal/object
3.19. 9 50% of the animal/object
3.19.10 100 % of the animal/object
3.20. Automatic Printout of Results
3.20. 1 * Off
3.20. 2 On
59
To Next Page
Loading...
Need help?
General
