Sartorius CPA 5201 - Example: Setting Time, Date, and Display Brightness; Step-by-Step Time, Date, and Brightness Setup

33
Example: Setting the time, date and display brightness
Step Key (or instruction) Display
1. Switch off the balance. (E)
2. Switch the balance on; (E)
while all segments
are displayed: (F) briefly
--------
$ To move the cursor within (A) --------
ID number: repeatedly
$ ITo set or change ID: (CAL)
-3------
repeatedly
3. Confirm ID and activate (TARE)
H10.14.11
time setting.
4. Select 24-hour clock (“H") or
112-hour clock (“P"). (CAL)
H10.14.19
5. Toggle between hours, (A) H10.15.19
minutes, seconds and 12-hour
or 24-hour time mode.
6. Synchronize seconds with
a reference clock. (CAL)
H10.15.00
7. Confirm time and activate date. (TARE) 29.jan.01
8. Set date (CAL) repeatedly,
“Day," (A)
01.jan.01
“Month," and, (CAL) repeatedly
(A)
22.apr.01
if desired, “Year." (CAL) repeatedly
Confirm date and activate
display brightness. (TARE)
22.apr.01