Sartorius CPA6202S - Configuration Settings; Configuration Purpose and Features; Printing Parameter Settings

25
Configuration
Purpose
To adapt the balance to individual
requirements by choosing from
parameters options in the Setup menu.
Features
To open the Setup menu, switch the
balance off and then on again by
pressing (E). While all segments are lit,
press (TARE) briefly.
Scroll upward ↑:
Press (CAL)
Scroll to the right →:
Press (A)
Confirm input:
Press (TARE)
Save settings and exit menu:
Press and hold (TARE) (> 2 sec.)
G Printing the Parameter Settings
– At the 3
rd
menu level (lowest level;
see also the next page): Press and hold
(A) (> 2 sec.).
> Printout (Example)
Menu711
– At the 2nd menu level:
Press and hold (A) (> 2 sec.).
> Printout (Example)
Menu711
Menu721
Menu731
– All current menu settings are printed
when the 1
st
menu level (highest level)
is displayed: Press and hold (A)
(> 2 sec.).