Need help?Do you have a question about the Sartorius CPA3202S and is the answer not in the manual?
General| Max Capacity | 3200 g |
|---|---|
| Readability | 0.01 g |
| Pan Size | 210 mm |
| Display | LCD |
| Power Supply | AC adapter (included), rechargeable battery (optional) |
| Linearity | ± 0.02 g |
| Calibration | External |
| Interface | RS232 |
| Stabilization Time (typical) | 2 seconds |
Read operating instructions carefully, avoid hazardous areas, and ensure proper use.
Check voltage, use caution with cables, and ensure proper power connection.
Do not expose balance to extreme temperatures, moisture, shocks, blows or vibration.
After unpacking, check equipment immediately for any external damage.
Choose a suitable location and condition the balance to ambient temperature.
Explains the control seal for verified balances used in legal metrology.
Steps for installing the CPA2P balance, including placing internal components.
Steps for installing CPA2P-F, detailing filter pan and standard weighing pan use.
Procedures for positioning and securing the draft shield on analytical balances.
Identifies and describes the balance's display indicators and control keys.
Instructions on how to print the balance's current parameter settings.
Program to weigh components into a defined total weight.
Program to determine the number of parts based on reference sample weight.
Program to obtain weight readouts as a percentage of a reference weight.
Program for determining weights of unstable samples by averaging multiple readings.
Application to switch between different weight units displayed on the balance.
Explains how to generate automatic/manual printouts and format data.
Details configuration for ISO/GLP compliant printouts and data IDs.
Describes the serial interface, its features, and factory settings.
Explains how non-verified digits are identified on printouts.
Explains the formats for sending control commands to the balance via interface.
Details pin assignments for female and male RS-232 connectors.
Lists common error codes, their causes, and the corresponding solutions.
Steps to prepare the CPA2P model for safe transport, including part removal.
Steps to prepare the CPA2P-F model for safe transport, including filter pan removal.
Information on service, authorized repairs, and battery replacement safety.
Guidelines for cleaning the balance, including stainless steel surfaces.
Detailed technical specifications for CPA2P and CPA2P-F balance models.
Explains EU directives for weighing instruments used in legal metrology.
Information on Sartorius's EC verification services for legal metrological verification.
To Next Page
