Need help?Do you have a question about the Sartorius CPA34001S-OCE and is the answer not in the manual?
General| Maximum Capacity | 34 kg |
|---|---|
| Readability | 0.1 g |
| Calibration | External |
| Display Type | LCD |
| Repeatability (Std. Dev.) | 0.1 g |
| Linearity | ±0.2 g |
| Interface | RS-232 |
| Protection Class | IP54 |
| Power Supply | AC adapter |
| Response Time (typical) | 2 seconds |
| Operating Temperature | 10 to 30 °C |
Overview of Sartorius CP and Gemplus Series balance models.
Lists the CPA, GCA, and GPA models covered by these instructions.
Read and follow operating instructions to prevent equipment damage and ensure safe use.
Ensure correct voltage, handle RS-232 cables with caution, and consult regulations.
Avoid extreme temperatures, moisture, shocks, blows, or vibration during transport.
Check equipment immediately for external damage after unpacking.
Acclimate balance to room temperature for approx. 2 hours before use.
Details on verification seals for accuracy class II balances in the EU.
Steps for installing components within the chamber for CPA2P models.
Steps for installing components for CPA2P-F models, including filter pans.
Instructions for positioning and securing the analytical draft shield.
Procedure for connecting CPA26P and CPA225D models to the electronics box.
Steps for placing and securing the draft shield on 3-sided shield models.
Component placement for rectangular pans with capacity up to 10 kg.
Component placement for rectangular pans with capacity over 10 kg.
Connecting the AC adapter to the electronics box for specific models.
Connecting the AC adapter to the balance for models up to 10 kg.
Information on selecting and connecting country-specific power cords.
Connecting the AC adapter to balances with weighing capacities over 10 kg.
Statements regarding FCC rules and potential radio interference.
Specifies the necessary warmup time for accurate results after power connection.
Instructions for securing balances with a capacity up to 10 kg.
Adjusting the front feet to level balances with capacity up to 10 kg.
Adjusting leveling feet for balances with capacity over 10 kg.
Identifies and explains the balance display and operating keys.
Compliance for verified balances used as legal measuring instruments.
Guidance on working with microbalances for steady, uninterrupted weighing.
Covers switching the balance on/off and standby mode.
Specific instructions for filter weighing using the CPA2P-F model.
Instructions for below-balance weighing on analytical and precision balances.
Steps to set up below-balance weighing for CPA2P microbalances.
Performing internal calibration/adjustment after warmup for legal metrology.
Information on external calibration for accuracy class II balances.
Describes the sequence and options for calibration and adjustment.
Permitted temperature ranges for isoCAL on verified balances.
How to print current balance parameter settings from different menu levels.
Step-by-step guide for setting time, date, and adjusting display brightness.
Explains the function keys (F, CF) used within application programs.
Setting parameters for automatic printout when components are stored.
Shows examples of printouts for net-total formulation data.
Details on using function keys for piece weight determination.
Optimizing counting accuracy via automatic reference sample updating.
Configuring a reference balance/scale for higher counting precision.
Setting parameters for the Counting program and printout.
Using function keys to begin percentage calculation and change reference.
Setting parameters for the Weighing in Percent program.
Displaying reference percentage and calculated percentage.
Activating the program and changing subweighing operation count.
Setting parameters for the Animal Weighing program.
Shows printout details for subweighing operations and calculated average.
Configuring printout options like line format and application parameters.
Enabling ISO/GLP compliant printouts for ambient characteristics.
Setting up automatic weight value printing, with or without stability parameter.
Examples of printouts with and without data ID codes.
Generating printouts of initialization values for application programs.
Demonstrates automatic weight readout printing.
Configuring menu codes for ISO/GLP compliant records.
Configuring transmission rate, parity, stop bits, and handshake mode.
Identifying non-verified digits in printouts using brackets.
Details the output format for 16-character data strings.
Details the output format for 22-character data strings with ID codes.
Interpreting special codes for status and error codes for issues.
Defines the structure and characters for control commands.
Ensuring correct data transfer by matching parameters between devices.
Describes hardware and software handshake methods for communication.
Setting up automatic output of data without a print command.
Warning about incorrect pin assignments on non-Sartorius RS-232 cables.
Detailed pinout for the female interface connector and male connector.
General instructions for cleaning the balance and its parts.
Specific guide for cleaning stainless steel parts on the balance.
Instructions for cleaning removable parts of the weighing chamber.
Steps to take if safe operation is no longer warranted.
Detailed technical specifications for CPA2P and CPA2P-F models.
Details on Council Directive 90/384/EEC for non-automatic weighing instruments.
Information on Sartorius' 'New Installation' service package.
Sartorius' authorized service for EC verification of weighing instruments.
Information on the validity and renewal of verification in European countries.
To Next Page