Need help?Do you have a question about the Sartorius CPA323S and is the answer not in the manual?
General| Capacity | 320 g |
|---|---|
| Readability | 0.001 g |
| Display | LCD |
| Repeatability (Std. Dev.) | 0.001 g |
| Linearity | ±0.002 g |
| Interface | RS232 |
| Power Supply | AC adapter |
| Stabilization Time (typical) | 2 sec |
| Operating Temperature | 10 °C to 30 °C |
| Calibration | Internal / External |
Introduces the Sartorius CP and Gemplus series balance models.
Specifies the CPA, GCA, and GPA balance models covered by these instructions.
Provides essential guidelines for safe operation and handling of the balance to prevent damage.
Outlines precautions related to electrical connections, voltage, and environmental conditions.
Recommendations for handling, storing, and unpacking the balance safely.
Guidelines for choosing a suitable location and environmental conditions for installation.
Step-by-step guide for assembling components for the CPA2P and CPA2P-F models.
Procedures for positioning and securing the analytical draft shield on the balance.
Information on using the AC adapter, connecting power, and safety considerations.
Procedure for connecting external devices and required balance warmup times.
Explains the balance display elements, symbols, and the function of each operating key.
Describes the weighing process and requirements for legal metrology applications.
Details on performing internal calibration and external calibration for accuracy class II balances.
Explains the automatic calibration function, its triggers, and temperature restrictions for verified balances.
How to adjust balance parameters via the setup menu and print current settings.
Example of setting menu codes to adjust the balance for unstable ambient conditions.
Configuring measurement parameters for ISO/GLP records and adjusting display brightness.
Explains application programs and the function keys used to manage them.
Describes weighing multiple components to achieve a defined total weight and storing results.
Explains how to determine the number of parts using a reference sample quantity and weight.
Allows obtaining weight readouts as a percentage of a reference weight and managing the program.
Determines weights of unstable samples by averaging multiple readings with automatic start options.
Instructions to configure and use the application for switching display units.
Information on generating printouts, their features, and default factory settings.
Guidance on setting menu codes to control printout behavior, including ISO/GLP compliance and auto print.
Explains ISO/GLP parameters, settings, and function keys for generating compliant records.
Describes the serial interface port, its settings, and preparation for connection.
Default configurations for transmission rate, parity, stop bits, and handshake for the serial interface.
Guidance on preparing the interface connection and identifying non-verified digits on printouts.
Details the character output format for 16-character data strings, including codes and errors.
Describes the 22-character data output format, including ID codes and provides an example.
Details command formats and characters used to control balance functions via the interface.
Details connector pins, specifications, and warnings for using RS-232 cables.
Steps to prepare CPA2P and CPA2P-F models for safe transport.
Information on service, repairs, and general procedures for cleaning the balance.
Instructions for cleaning the weighing chamber and performing a safety inspection.
Guidelines for proper disposal of equipment and packaging according to EU regulations.
Describes optional accessories like data printers, remote displays, and rechargeable battery packs.
Lists optional accessories including software, kits, weights, adapters, and draft shield chambers.
Information on directives for legal metrology and Sartorius EC verification services.
Services offered for initial verification, installation, startup, inspection, and training of weighing instruments.
Sartorius service for performing EC verification of weighing instruments by authorized technicians.
Information on the validity and renewal of verifications within European countries and contact points.
Conditions for the validity of the Declaration of Type Conformity, including CE mark requirements.
Illustrates markings for different balance models and explains the key to symbols.
Shows examples of model designation and verified instrument plates with relevant information.
To Next Page
