Need help?Do you have a question about the Sartorius CPA1003S and is the answer not in the manual?
Safety considerations for balance installation and cable connections.
Choosing a location, conditioning, and legal metrology seal.
Procedure for adapting the balance to room temperature after transport.
Steps for installing components in the CPA2P balance chamber.
Steps for installing components in the CPA2P-F balance chamber.
Positioning the draft shield on balances with analytical shields.
Duration balance needs to stabilize before accurate measurements.
Securing the balance using a chain or lock to the designated lug.
Adjusting front feet for balances with capacity up to 10 kg.
Adjusting leveling feet for balances with capacity over 10 kg.
Identification and function of all display segments and keys.
Requirements for using balances as legal measuring instruments in the EU.
Specific operational techniques for CPA2P and CPA26P microbalances.
Procedure for below-balance weighing on analytical and precision balances.
Procedure for below-balance weighing on CPA2P microbalances.
Internal calibration requirements for legal metrology use in the EU.
Steps for performing external calibration for accuracy class II balances.
Configuration options for the sequence of calibration and adjustment.
Restrictions and temperature ranges for isoCAL on verified balances.
How to print current configuration settings from the balance menu.
Key operations for navigating and confirming settings during configuration.
Description of function keys to start, toggle, or end application programs.
Capabilities of the net-total formulation program for weighing components.
Format and content of printouts generated by the program.
Capabilities of the counting program for determining part quantities.
Usage of function keys for setting reference quantity and toggling display.
Using a second balance for higher precision in counting large parts.
Example of the data output format for the counting program.
Capabilities of the weighing in percent program for proportional weight readings.
Usage of function keys for setting reference percentage and toggling display.
Example of the data output format for the weighing in percent program.
Capabilities of the program for weighing unstable samples and averaging results.
Usage of function keys for activating the program and changing subweighing operations.
Example of the data output format for the animal weighing program.
Using the function key to switch between weight units displayed.
Configuration options for manual/automatic printouts and line format.
Generating printouts of initialization values for active application programs.
Configuring automatic weight readout printing.
Menu codes for configuring ISO/GLP compliant records.
Default transmission rate, parity, stop bits, and handshake mode.
Notes on pin assignments and connecting peripheral devices.
How non-verified digits are identified on printouts.
Explanation of special codes and error code numbers in data output.
Different formats for sending control commands to the balance.
Hardware and software handshake options for data transmission.
Detailed mapping of pins for the female interface connector.
Steps to prepare the CPA2P model for safe transport.
Steps to prepare the CPA2P-F model for safe transport.
General instructions for cleaning the balance and its surfaces.
Specific methods for cleaning stainless steel parts of the balance.
Steps to take if balance operation is no longer safe.
EU directives and regulations for weighing instruments in legal metrology.
Services offered by Sartorius for balance verification and inspection.
Information on subsequent verifications within European countries.
To Next Page
General