6
Startup
Attach the dust cover by pressing down on the adhesive disks,
and mount the weighing pan
(1)
on the balance.
Your balance is powered by an AC adapter. Please make sure
that the voltage rating printed on this unit is identical to your lo-
cal line voltage rating.
Plug the cord of the AC adapter into the power receptacle of the
balance. Secure the connection by tightening the knurled collar.
Now plug the AC adapter into a wall outlet.
At the point of use, level the balance using the leveling feet
(7)
so that the air bubble is entered within the circle of the level in-
dicator
(9) (only for the L 2200 S)
.
To Next Page
Loading...
Need help?
General