Need help?Do you have a question about the Sartorius FC and is the answer not in the manual?
Enables scale terminal configuration via setup program.
Describes basic weighing and application functions.
Allows selection of display language from five options.
Details settings for using the scale in legal metrology.
Enables configuration of scale functions to meet individual requirements.
Lists the groups of scale functions available in the setup menu.
Covers functions for scale calibration and adjustment procedures.
Allows configuration of scale device parameters for individual needs.
Procedure for setting or modifying the setup menu password.
Covers serial communication port settings for various modes.
Lists available application groups and possible combinations.
Covers basic settings for applications like unit toggle and counting.
Sets target values and tolerances for sample checkweighing.
Configures scale functions to activate at specific times or intervals.
Runs as a cumulative memory function for weight and calculated values.
Allows adding weight values as components to a totalizing memory.
Enables statistical evaluation of weight and calculated values.
Enables printout configuration to meet individual requirements.
Lists device parameters for printout configuration.
Shows how to display scale information like model, serial, and version numbers.
Details how to display FlexPrint information including file names and software IDs.
Describes the fundamental weighing function accessible at all times.
Explains how to perform under-scale weighing using a hanger.
Describes serial communication port settings and modes.
Explains connecting external switches to control ports.
Important note on performing internal calibration for legal metrology use.
Lists features for isoTEST function, including external and internal calibration.
Explains automatic calibration triggered by temperature changes.
Procedure for checking the scale's repeatability using the reproTEST function.
Allows switching between two weight units by pressing a soft key.
Explains the counting application for determining piece counts of equal weight.
Lists features of the counting application, including scale configuration and input methods.
Allows obtaining weight readouts in percent relative to a reference weight.
Lists soft key functions for storing reference values and toggling displays.
Program to determine weights of unstable samples or under unstable conditions.
Lists features for animal weighing, including manual and automatic start.
Allows compensation for over-poured components in formulation.
Lists features for recalculation, including component input and correction.
Enables calculation of weight values using algebraic equations.
Lists features for calculation, including equation storage and operators.
Checks if samples meet pre-set target values or tolerance ranges.
Lists features for checkweighing, including target value entry and control lines.
Configures scale functions to activate at specific times or intervals.
Lists features for time-controlled functions, including activation types.
Runs as a cumulative memory function for weight and calculated values.
Lists features for totalizing, including storage and display options.
Allows adding weight values as components to a totalizing memory.
Lists features for formulation, including component input and storage.
Enables statistical evaluation of weight and calculated values.
Lists statistical values calculated by the application.
Allows storing tare weights or entering preset tare values.
Allows assigning IDs to values for documentation and printouts.
Lists features of ID codes, including storage, naming, and editing.
Loads weight values and calculation results into Application 3 memory.
Lists features for manual storage, including soft key assignment.
Allows entering, storing, and loading data records for application initialization.
Lists features of product data memory, including storage capacity and record management.
Allows loading user-defined label formats and print instruction files.
Lists features of FlexPrint, including print command generation and output items.
Explains how information is displayed on the scale's unit.
Describes the display line showing metrological data for verified scales.
Details interface features like type, operating mode, and transmission rates.
Lists factory default settings for interface parameters.
Specifies formats for sending commands to the scale.
Illustrates cabling for connecting a PC via a Zener barrier using RS-232.
Shows cabling diagrams for RS-485 connections in hazardous areas.
Provides solutions for resolving displayed error codes.
Provides labeled diagrams of scale components and their positions.
Lists general specifications applicable to all standard scale models.
Provides detailed specifications for specific scale models.
Lists available power supplies for safe and hazardous areas.
Details Zener barriers and other electrical accessories.
Covers regulations for non-automatic weighing instruments in legal metrology.
Explains Sartorius's EC verification service for legal metrology.
To Next Page
General