Manual Storage (M+)
Purpose
With this function you can load
weight values and calculation results
directly from Application 1 (e.g.,
counting, weighing in percent) or
Application 2 (checkweighing, time-
controlled functions) into Application 3
(totalizing, formulation, statistics).
Available Features
– You can assign this function to the
fourth or fifth soft key (from the right),
i.e. F4 or F5. The soft key designation
for this function is:
M+
– An Application 3 program (totalizing,
formulation or statistics) must be
running so you can display and print
the result
Factory Settings
There are no optional parameters
90
Preparation
● Turn on the scale: press e
> Sartorius logo is displayed
● Select Extra function (F4) or Extra function (F5) in the Setup menu: press H
§ Select
Application parameters: press the q soft key 2+,
then the
O soft key
● Select
Extra func. (F4) or Extra func. (F5):
press the
q soft key 3+ (or 4+), then the O soft key once
● Select
Man. store in app.3 memory (M+)
● Confirm Man. store in app.3 memory (M+) see also the
“Application Menu (Overview)” in the chapter entitled “Configuration”
● Save settings and exit the Setup menu: press the
oo soft key
To Next Page
Loading...
Need help?
General