Need help?Do you have a question about the Sartorius Combics CAW1P and is the answer not in the manual?
General| Power Supply | 100-240 V AC, 50/60 Hz |
|---|---|
| Display | LCD |
| Protection Class | IP65 |
| Calibration | External |
| Interface | RS-232 |
Details essential safety measures for operating the device and preventing hazards.
Specific warning against using the equipment in hazardous areas.
Explains how to safely connect the device to the AC power supply.
Emphasizes the requirement for a protective grounding conductor for Class 1 devices.
Explains how to access and utilize the Service mode for calibration and configuration.
Step-by-step instructions for activating the Service mode via menu navigation.
Step-by-step guide for performing external linearization of the scale.
How to perform adjustment by entering characteristic data of load cells.
Details how to enter geographical data for external adjustment in legal metrology.
Provides the procedural steps and menu structure for geographical data entry.
Instructions for entering calibration and linearization weights via the Setup menu.
Procedure for setting the preload value, particularly for legal metrology use.
Instructions on how to delete the preload value from the scale.
Overview of keys and their functions for weighing operations on Combics 1 and 2.
Procedure for establishing or changing a password to secure settings.
Instructions for modifying or removing existing passwords.
Basic application for recording weight values and using features like tare and zeroing.
Defines calibration and adjustment purposes and their configuration for legal metrology.
Step-by-step guide for external calibration using default weights.
Procedure for internal calibration and adjustment specific to CAH models.
Explains the SQmin function for displaying minimum sample quantity per USP guidelines.
Details the Counting application features, parameters, and exit procedures.
Details the Neutral Measurement application for length, surface, and volume.
Details the Averaging application for calculating averages from multiple weighings.
Details the Weighing in Percent application for obtaining weight readouts in percentage.
Details the Checkweighing application for verifying sample weight against target values.
Details the Classification application for sorting samples into weight classes.
Details the Totalizing application for adding weights to a memory.
Details the Net Total Formulation application for weighing components up to a defined total.
How to define target weight and tolerance limits for checkweighing.
Shows how different applications can be combined for extended functionality.
Continuation of the portioning example, showing final results and printout.
Overview of available data interfaces like COM1 and UniCOM, and their capabilities.
How to configure interfaces as COM ports using SBI, SMA, Profibus, or Ethernet protocols.
Explains the command structure for controlling the instrument via an interface port.
Lists error codes, their causes, and solutions for troubleshooting.
Examples of linearization, calibration, and preload printouts with GMP formatting.
Table detailing error codes, their causes, and recommended solutions for troubleshooting.
Safety precautions and guidelines for performing equipment repairs.
Technical specifications covering readability, accuracy, interfaces, and housing.
Technical details and model designations for CAH series scales.
Lists additional accessories and their order numbers, including software and peripheral devices.
Continues the EC Declaration of Type Conformity with more model details.
Overviews application categories like Basic, Monitoring, and Cumulative functions.
Configuration for printouts, including headers, print quantities, and GMP settings.
Lists device settings categories like weighing platform, interfaces, and barcode.
Details application menu parameters for Combics 1, including Weighing and Counting.
Details parameters for Net Total Formulation application.
Configuration settings for the COM1 interface, including data protocols and output formats.
Configuration settings for the UniCOM interface, including protocols and network addresses.
Details parameters for Totalizing application.
Continues Combics 2 application menus: Checkweighing, Classification.
Lists various calibration and adjustment procedures and sequence settings.
Settings for displaying SQmin value and GMP-compliant printout.
Procedure for entering, changing, or deleting user passwords.
Standard ADC configuration settings for ranges, scale intervals, and weight units.
Settings for verifiable configurations, including accuracy class and ranges.
Information and procedures related to scale calibration.
Troubleshooting guide for common error codes and their solutions.
General information and procedures for operating the weighing instrument.
Essential safety instructions for using the device.
Information on accessing and using the service mode for advanced functions.
Guidelines for operating the device in explosion-risk areas (Zone 2 or Zone 22).
Instructions for connecting the device to the mains supply in explosion-risk areas.
Information on data transfer requirements and safety in explosion-risk areas.
Safety guidelines for connecting weighing platforms to the indicator.
Safety guidelines for connecting external devices in hazardous areas.
Continues safety instructions regarding electrical interference, IP protection, and chemicals.
Instructions for accessing and managing general and service passwords.
To Next Page
