Operating Instructions Combics Indicators 61
Application Start There are three ways to start the averaging routine:
– Manual start with preset number of sub-weighing operations: Place the sample
on the platform and press the O key
– Manual start with user-defi ned number of sub-weighing operations: Place the
sample on the platform and enter the number of weighing operations using the
keypad. Press the r key to save the number entered and begin weighing.
– Automatic start with preset number of sub-weighing operations: Measurement
begins when you place the fi rst sample on the platform, provided the start
conditions are met.
Preparation t Open the APPLIC. / APPLIC.1 /ANIM.WG menu.
Available Parameter Settings * = Factory setting
MIN.INIT Minimum load for initialization 3.6
1 digit 1 digit* 3.6.1
2 digit 2 digits 3.6.2
5 digit 5 digits 3.6.3
10 digT. 10 digits 3.6.4
20 digT. 20 digits 3.6.5
50 digT. 50 digits 3.6.6
100 diG. 100 digits 3.6.7
200 diG. 200 digits 3.6.8
500 diG. 500 digits 3.6.9
1000 dI. 1000 digits 3.6.10
START Start of averaging 3.18.
manual Manual* 3.18.1
automat Automatic 3.18.2
ACTIVTY Animal activity 3.19.
0.1 perc. 0.1% of animal/object 3.19.1
0.2 perc. 0.2% of animal/object* 3.19.2
0.5 perc. 0.5% of animal/object 3.19.3
1 perc. 1% of animal/object 3.19.4
2 perc. 2% of animal/object 3.19.5
5 perc. 5% of animal/object 3.19.6
10 perc. 10% of animal/object 3.19.7
20 perc. 20% of animal/object 3.19.8
50 perc. 50% of animal/object 3.19.9
100 perc. 100% of animal/object 3.19.10
PRINT Autom. printout of results 3.20.
manual Off* 3.20.1
automat On 3.20.2
DIS.UNLD Static display of result after load removed 3.21.
CLEARED Display is fi xed until unload
threshold reached* 3.21.1
PRESENT Fixed display until c is pressed 3.21.2
) �t To save the setting, press the ) key.
( ( ... t To exit setup: Press the ( key several times.
Operation