Operating Instructions Combics Indicators 97
Product Data Memory (Combics 2)
Purpose The product data memory stores initialization data and user data (product and tare
values).
Features – The product data memory has 100 memory cells for product or tare values.
For example, you can store 80 sets of application data and 20 tare values
– Each memory cell is uniquely identifi ed by a number of up to three digits.
– The product data memory can be used with the following applications:
Application 1 Application 2
– Basic Weighing – Checkweighing
– Counting – Classifi cation
– Neutral Measurement
– Animal Weighing
– Weighing in Percent
– Data records can be created, overwritten and individually deleted
– Data remains stored when the scale is switched off
Saving product data (in this example in the “Counting” application)
§ Start the Counting application.
t Enter a memory number and press and hold the R key (min 2 seconds).
Saving preset tare values
t Allocate preset tare memory.
t Enter a memory number and press and hold the t key (min 2 seconds).
Activating saved product or tare values
t Enter a memory number and press the R key.
Displaying information for a specific product or tare value
t Enter a memory number and press the I key.
– Use the k key to switch between wRef (average piece weight) and nRef
(quantity).
– Use the ) key to scroll the displayed value to the right.
– Use the R key to activate the displayed memory.
– Press and hold the c key (min. 2 seconds) to delete the displayed memory.
t Exit the mode using the c key.
Displaying information for all product or tare memories
t Press the R key to display the fi rst memory number.
– Press the k key to scroll through in lexical order (e.g. 1, 3, 333, 4, etc.).
– Use the R key to activate the selected memory number.
– Press the I key to display the saved product values.
– Press and hold the c key (min. 2 seconds) to delete the selected memory
number.
t Exit the mode using the c key.
Deleting specific memory numbers
t Enter a memory number and press and hold the c key.
Operation
To Next Page
Loading...
Need help?
General
