Operating Instructions Combics Indicators 29
Weighing Operation
Combics 1 Combics 2
Keys for all models
e On/Off key
When in Standby mode, STANDBY is displayed.
( Zero key
– Press the key less than 2 seconds: Zero
– Press the key longer than 2 seconds: Displays the adjustment/confi guration
counter
) Tare key
– Saves the numeric input as the tare weight
– Press the key longer than 2 seconds: Start calibration/adjustment
k
Function key: Depends on the confi guration in the Setup menu, switches between the
– First and second weighing unit
– Gross and net values (Combics 1 only)
– Normal and 10-fold higher display resolution (Combics 1 only)
– Results display and SQmin display
J ISO test: Start calibration or adjustment
p Print key
– Press the key less than 2 seconds: Print
– Press the key longer than 2 seconds: Print GMP footer
Keys for Combics 2 only
n Toggle key: When two platforms are connected, this key toggles the display
between the two readouts.
The following four keys are used for operating the individual applications. Their
exact function is described in the respective section for the application.
c Delete key: Deletes initialization values or totalizing memory. During numeric entry
the last character entered is deleted.
r Reference value key: Changes the set reference value.
O OK key: Applies values or starts an application program.
w Toggle key: Toggles between display modes within an application program.
Operating Design
To Next Page
Loading...
Need help?
General
