)  t  To apply a character, press the ) key.
t    Enter all additional characters of the password as described above. 
t    Press and hold the ) key to save the password.
  (  Use the ( key to exit the menu level to make additional settings if required
 
or
  )  Press the ) key longer than 2 seconds to exit the menu. 
    Changing or Deleting Passwords 
t  Open the U-CODE menu item in the SETUP menu as described above.
y  The old password must be entered to change or delete a password.
t  To change a password, overwrite the old password.
t    To delete a password, enter spaces and press the ) key.
  Operating Design