Sartorius Combics CAW1P - Menu Structure; CAL.;ADJ. Calibration, adjustment

146 Operating Instructions Combics Indicators
Menu Structure
BAHT Baht/bat
1)
1.7.19
MESGHAL Mesghal/MS
1)
1.7.20
TONS Tons/t 1.7.21
1.DIS.DIG. Display accuracy 1.8
ALL Show all decimal places 1.8.1*
-1.WT.CHA Reduced by 1 digit 1.8.2
RES.*10 10-fold increased resolution 1.8.14
+DIV. 2 Increase resolution by 2 scale intervals 1.8.15
+DIV. 1 Increase resolution by 1 scale interval 1.8.16
CAL./ADJ. Calibration, adjustment 1.9
CAL.EXT. External calibration/adjustment with default weight 1.9.1*
CAL.E.AUT. External cal./adjustment, weight is detected (see 1.18.1) 1.9.2
CAL.E.USR. External calibr./adjustment with user-defi ned weight 1.9.3
CAL.INT. Internal calibr./adjustment (for IS scales only) 1.9.4
LIN.INT. Internal linearization (for IS scales only) 1.9.5
1)
LIN.EXT. External linearization with default weights 1.9.6
1)
LIN.E.USR. External linearization with user-defi ned weights 1.9.7
1)
SET.PREL. Setting the preload 1.9.8
DEL.PREL. Clearing the preload 1.9.9
BLOCKED Key locked 1.9.10
CAL.SEQ. Calibration/Adjustment sequence 1.10
AUTOMAT Calibration with automatic adjustment 1.10.1
Manual Calibration with manual adjustment 1.10.2*
ZERORNG. Zero range 1.11
1 PERC. 1 percent/max. load 1.11.1
2 PERC. 2 percent/max. load 1.11.2
5 PERC. 5 percent/max. load 1.11.3*
INIT.ZER. Zero at Power On 1.12
1 PERC. 1 percent/max. load 1.12.1*
2 PERC. 2 percent/max. load 1.12.2
5 PERC. 5 percent/max. load 1.12.3
ON TARE Tare/zero at Power On 1.13
ON On 1.13.1*
OFF Off 1.13.2
ISOCAL Calibration prompt 1.15
Off Off 1.15.1*
ADJ.PROM On 1.15.2
CAL.EXT External calibration/adjustment 1.16
ACTIVAT Activated 1.16.1*
DEACT. Deactivated 1.16.2
Cal.Unit Weight unit for calibration 1.17
GRAMS Gram 1.17.1*
KILOGR. Kilogram 1.17.2
TONS Ton 1.17.3
POUNDS Pound 1.17.4
man.ext.w Manual entry of external weights 1.18
CAL./ADJ. Cal/Adj. weight 1.18.1
LIN. WT.1 Linearization weight 1 1.18.2
1)
LIN. WT.2 Linearization weight 2 1.18.3
1)
LIN. WT.3 Linearization weight 3 1.18.4
1)
LIN. WT.4 Linearization weight 4 1.18.5
1)
ADJ.W/O.W Adjustment without weights
1)
1.19
NOM.LOAD Nominal load 1.19.1
RESOLUT Resolution 1.19.2
SENSIT.1 Sensitivity 1 1.19.3
SENSIT.2 Sensitivity 2 1.19.4
SENSIT.3 Sensitivity 3 1.19.5
SENSIT.4 Sensitivity 4 1.19.6
ZER.POIN Zero point 1.19.7
SAVE Save parameters 1.19.8
GEOG.DAT Geographical data
1)
1.20
LATITUD Latitude 1.20.1
ALTITUD Altitude 1.20.2
GRAVITY Gravitational acceleration 1.20.3
SAVE Save parameters 1.20.4
1)
Only in Service mode