Sartorius Combics CAW1P - Combics 2 Application Menu

Operating Instructions Combics Indicators 143
Menu Structure
DEC.PLCS Decimal places in displayed result 3.10
NONE None 3.10.1
1 Dec.Pl 1 decimal place 3.10.2
2 DEC.PL 2 decimal places 3.10.3
3 Dec.Pl 3 decimal places 3.10.4
SAVE WT. Parameter for saving weight values 3.11
STABIL. With stability 3.11.1*
ACC.STAB With increased stability 3.11.2
REF.WP Reference weighing instrument 3.13
NO WP No platform selected 3.13.1*
WP 1 Weighing platform 1 3.13.2
WP 2 Weighing platform 2 3.13.3
CALC.DIS Display of calculated value 3.15
RESID.QT Residue 3.15.1*
LOSS Calculation 3.15.2
Applic./Applic.2 Off
Applic./Applic.2 CHECK. WG Checkweighing
CHECK.RG Checkweighing range 4.2
30-170% 30 to 170% 4.2.1*
10-MAX.L 10% to infi nity 4.2.2
CTRL.SET Activate SET control output 4.3
OUTPUT SET output 4.3.1*
OP.READY Ready to operate (for process control systems) 4.3.2
OUTP.ACT Activation of outputs 4.4
OFF Off 4.4.1
ALWAY.ON Always 4.4.2
STABIL. On at stability 4.4.3
CHECK.RG On within checkweighing range 4.4.4*
STAB.CHK On at stability within checkweighing range 4.4.5
INPUT Parameter input 4.5
TAR.MN.MX Min, Max, target value 4.5.1*
TARG.PER Only target value with percent limits 4.5.2
TAR.A.PER Target value with asymmetrical percent limits 4.5.3
TAR.TOL Target value with relative tolerances 4.5.4
AUT.PRNT Automatic printing 4.6
OFF Off 4.6.1*
ON On 4.6.2
OK Only values within tolerance 4.6.3
NOT OK Only values outside tolerance 4.6.4
APP.ZERO Checkweighing toward zero 4.7
OFF Off 4.7.1*
ON On (Y symbol is displayed) 4.7.2
Applic./Applic.2 CLASS. Classification
param.1 Parameter 1
min.init Minimum load for application 3.6
1-digit 1 digit 3.6.1*
2-digit 2 digits 3.6.2
... see “Weighing"
1000-d 1000 digits 3.6.10
param.2 Parameter 2
CTRL.SET Activate SET control output 4.3
OUTPUT SET output 4.3.1*
OP.READY Ready to operate (for process control systems) 4.3.2
OUTP.ACT Activation of outputs 4.7
OFF Off 4.7.1
ALWAY.ON Always 4.7.2
STABIL. On at stability 4.7.3*
QTY. Number of classes 4.8
3 CLASS 3 classes 4.8.1*
5 CLASS 5 classes 4.8.2
INPUT Parameter input 4.9
WEIGHTS Weight values 4.9.1*
PERC.TAG Percentage 4.9.2