Sartorius Combics CAW1P - Applic.;Applic.3 Net total formulation; Applic.;Applic.3 Total Totalizing

144 Operating Instructions Combics Indicators
Menu Structure
PRINT Automatic Printing 4.10
MANUAL Manual 4.10.1*
AUTOMAT Automatic 4.10.2
Applic.3 off
Applic./Applic.3 net.tot. Net total formulation
min.init Minimum load for application 3.6
1-digit 1 digit 3.6.1*
2-digit 2 digits 3.6.2
... see “Weighing"
1000-d 1000 digits 3.6.10
PRT.SAV. Individual/Component printout when saved 3.17
OFF Automatic printing off 3.17.1
EACH.TIM. Print the entire standard print confi guration every time
when the O key is pressed 3.17.2*
ONCE Print the entire standard print confi guration once with the O key 3.17.3
Applic./Applic.3 Total Totalizing
min.init Minimum load for application 3.6
1-digit 1 digit 3.6.1*
2-digit 2 digits 3.6.2
... see “Weighing"
1000-d 1000 digits 3.6.10
AUTO.SAV Autosave 3.16
OFF Off 3.16.1*
ON On 3.16.2
PRT.SAV. Individual/Component printout when saved 3.17
OFF Automatic printing off 3.17.1
EACH.TIM. Print the entire standard print confi guration every time
when the O key is pressed 3.17.2*
ONCE Print the entire standard print confi guration once with the O key 3.17.3
VAL.FROM Value source for automatic saving 3.22
Appl. 1 Application 1 3.22.1*
Appl. 2 Application 2 3.22.2
SAV.VAL. Save value 3.23
NET Net 3.23.1*
CALCUL. Calculated 3.23.2
NET+CAL Net and Calculated 3.23.3
Application / Aut.tare Automatic Taring
AUT.TARE 1st weight tared 3.7
OFF Off 3.7.1*
ON On 3.7.2
Application / min.tare Minimum load for automatic taring and automatic printing
MIN.TARE Minimum load for automatic taring and automatic printing 3.5
1-digit 1 digit 3.5.1*
2-digit 2 digits 3.5.2
... see “Weighing"
1000-d 1000 digits 3.5.10
Application / Aut.strt For “On” automatic start of application with the last saved initialization data
AUT.strt Automatic start of application with last settings 3.8
AUTOMAT Automatic (on) 3.8.1*
MANUAL Manual (off) 3.8.2
Applic./CLER.CF Selective deleting with the c key
CLER.CF Selective deleting with the c key 3.24
ALL.APPL Deletes all applications 3.24.1*
SEL.APPL Only deletes selected application 3.24.2
Applic./TARE.FNC Tare function
TARE.FNCTare function settings 3.25
NORMAL Can add a preset tare if tare value is available;
however, no tare function possible 3.25.1*
SPECIAL When a preset tare is entered, the tare value is deleted;
however, tare function activation is possible 3.25.2