Extra Functions (in the Application Menu)
Second Tare Memory
(Preset Tare)
Purpose
With this function, you can store the
weight currently on the scale as a tare
weight, or use the numeric keys to enter
a number for a preset tare weight.
You can use this function in
combination with a program from
Application 1 (such as counting,
weighing in percent), one from
Application 2 (checkweighing, time-
controlled functions) and one from
Application 3 (totalizing, formulation,
statistics) as well as with the extra
functions.
Features
– Store a weight on the scale in the
second tare memory (without numeric
input)
– Store a numeric value in the second
tare memory (input using the numeric
keys)
– Identify a net value as s when there
is a value stored in the second tare
memory
– You can assign this function to the
fourth or fifth soft key (from the right);
i.e., F4 or F5.
The soft key designation for this
function is:
PT1/T1
– Optional configuration in the Setup
menu for storing the current weight
readout as the container tare weight.
Any load subsequently placed on the
scale that is more than 70% of the tare
weight is automatically recognized
as a container and the scale is tared
automatically.
– Automatic printout when a value is
stored or input (see “Configuration”)
– Press c to delete the (preset) tare
value
84
Factory Settings
Container tare weight:
No
Automatic printout: Off
Soft Key Functions
PT1/T1 Store weight as tare value
PT1 Store input value
Printout of the Data in the
2nd Tare Memory
The printout shows either:
– Net value N1,
– Tare weight T1, or
– Manually entered tare value PT1
N1 63.48 g
T1 138.73 g
PT1 150.00 g
N1: Net weight (value) when a weight
is stored in the tare memory
T1: Tare weight
PT1: Preset tare value entered using
the numeric keys
Preparation
● Turn on the scale: press e
> The Sartorius logo is displayed; a self-test is performed
● Select Extra function (F4) or Extra function (F5) in the Setup menu: press H
● Select
Application parameters: press the q soft key 2+,
then the
O soft key once
● Select
Extra function (F4) or Extra function (F5):
press the
q soft key 3+ (or 4+), then press the O soft key once
● Select
2nd tare memory
● Confirm 2nd tare memory
2nd Container tare ο No
tare memory weight Yes
Automatic printout Net value
Tare/preset
ο Off
ο = factory setting
see also the “Application Parameters (Overview)” in the chapter entitled “Configuration”
● Save settings and exit the Setup menu: press the
oo soft key
Second Tare Memory in Legal Metrology
– Press the
(i)PT1 soft key to enter information about the tare value using the
number keys.
– The PT1 tare value is printed out with the net value.
To Next Page
Loading...
