Sartorius FC - Printouts

Printouts
Purpose
This function enables you to print out
weights, other measured values and IDs.
You can format the printout to meet
different requirements.
Features
Line format: You can configure a data
ID code with up to 6 characters at the
beginning of each of the values to be
printed
Weight ID: You can configure an
extra line for identification of each
weighed or calculated value using
the code
S ID
Print application parameters: You
can generate a printout of the values
configured for initialization of an
application before printing the
measured results
ISO/GMP-compliant printout: You can
print out parameters relating to the
weighing conditions
Print animal weights: Application-
defined, automatic printout of animal
weights or of animal weights plus
calculated weights after averaging
Configuring Printout Formats
For a number of application programs, you
need to set initialization values. All values
upon initialization or only the main values
can be automatically printed as soon as
you have configured this in the Setup
menu:
Auto print upon
initialization
Weights and calculated values can be
printed as numeric values either with a
preceding data ID code (numeric value
with 22 characters) or without one
(numeric value only 16 characters). See
also the section on
Line format in
the chapter entitled “Data Output
Functions.”
You can generate an ISO/GMP
print-out always or only for calibration/
adjustment or turn off this option.
See also page 100.
Generating an ISO/GLP/GMP Printout
In the Setup menu, you have a choice
of three settings:
– No ISO/GLP/GMP printout generated
(
Off)
– ISO/GLP/GMP printout generated only
for calibration/adjustment (
Only for
calibration/adjustment)
– Every printout is an ISO/GLP/GMP-
compliant report (
Always on)
Auto print checkweighing results:
automatic printout of a weight when
it lies within the preset limits at stability
Auto print with time-controlled func-
tions: automatic printout of weights
after a preset time has elapsed or at
a defined time
Printout of intermediate or final evalua-
tion from the application 3 memory
(totalizing, formulation and statistics);
generate by pressing the
MR soft key
Generating Printouts Acceptable for
Legal Metrology:
You can configure the Setup menu
of the scale to generate data records
that are acceptable for legal metrology
on a Sartorius printer:
– YDP02
– YDP03
– YDP01IS
– YDP01IS Label
– YDP02IS
– YDP02IS Label
– YDP04IS
– YDP04IS Label
99