131
Accessories (Options)
Product Order No.
Power supplies
AC adapters for use in safe area (110 to 240 V)
EU excluding UK YPS02-ZDR
UK YPS02-ZGR
USA YPS02-ZKR
!Install the cable so that it is protected from damage.
Connect the terminal of the housing to a terminal
for equipotential bonding (PE = protective earthing
or grounding conductor)
Power supplies for use in hazardous area (110 to 240 V)
EU except UK YPS02-XDR
UK YPS02-XGR
USA YPS02-XKR
!Install the cable so that it is protected from damage.
Connect the terminal of the housing to a terminal
for equipotential bonding (PE = protective earthing
or grounding conductor)
External rechargeable battery pack, for use in Zone 1, 21 or YRB02-X
20 hazardous areas
Battery charger for YRB02-X battery pack (for use in safe area) YRB02LD
24V industrial power supply module for use in safe or YPS02-XV24
hazardous area, switching cabinet installation: 14″
Electrical accessories
Zener barrier (2 data lines) for connecting up to 8 weighing YDI01-Z
instruments (model YDO02F-X output port (RS 485) required);
cabeling supplied in accordance with customer requirements
Zener barrier (4 data lines) for connecting accessories installed YDI02-Z
in the safe area (e.g., printer, PC); cable for connceting Zener barrier
to weighing instrument: 20 m
Zener barrier (4 data lines, 4 control lines) for connecting accessories YDI03-Z
installed in the safe area (e.g., PLC); cable length: 20 m
!Install the cable so that it is protected from damage.
Connect the terminal of the housing to a suitable ground electrode
(PE = protective earthing or grounding conductor).
To Next Page
Loading...
