132
Accessories (Options)
Product Order No.
T-connector (1 input, 2 outputs), 14-pin round male connector; YTE02-X
cable length: 1 m
!Install the cable so that it is protected from damage.
Foot switch for hazardous areas/locations YPE05-X
(Choice of functions to emulate keys on the display
and control unit:
p, t, D, [isoTEST], c
Printer
(Data printer (not for use in hazardous areas/locations) YDP03-0CE
for hard copies with the date, time, statistical evaluation,
transaction counter; with an LCD (can be connected using:
adapter cable YCC01-0016M3 or directly, without the printer
cable included, using the interface cable YCC01-0019M3)
Can be used in legal metrology.
Please note: For verfied scales with e ≠ d, the last digit
on the printout must be specially identified as shown
on the scale display. Please set this parameter in the
printer menu (see instructions manual for the printer)
To Next Page
Loading...
