Sartorius FC - Counting; Purpose; Features

Purpose
With the Counting application, you
can determine the number of pieces of
approximately equal weight.
You can use this application program
in combination with a program chosen
from Application 2 (checkweighing,
time-controlled functions) and one from
Application 3 (totalizing, formulation,
statistics).
Features
– Optional scale configuration in Setup
for automatically initializing this
application and loading the most
recent reference sample quantity “nRef”
and average piece weight “wRef”
when you switch on the scale (this is
the automatic setting when the scale
is initialized; Setup menu: Application
parameters: Auto-start app. when
power goes on: On).
– Reference sample quantity “nRef”
entered manually
– Average piece weight “wRef” entered
manually
– Storage of the current weight value
for the preset reference sample
quantity “nRef”, to be loaded when
the Counting program is initialized
– Setting the accuracy when the
reference sample weight “wRef” is
stored for calculating a piece count
– Automatic output of the quantity and
sample weight via the data interface
port after initialization or reference
sample updating while running
the Counting program (Printout:
Application-defined printout: Auto
print upon initialization: All values)
– Toggling between piece count
and weight value by pressing the
Count. or Weigh. soft key
– Toggling between counting and
other applications using the D key
(for example, checkweighing)
Factory Settings
Accuracy when calculating piece weight:
Display accuracy
Reference sample updating:
Automatic
Soft Key Functions
nRef Store value input as reference
sample quantity
wRef Store input value as reference
sample weight
Update Reference updating criteria
met; reference updating can
be performed to optimize
the accuracy
Count. Toggle to the Counting
application
Weigh. Toggle to the Weighing mode
Start Storage of the current weight
value for the preset reference
sample quantity
48
Counting A