Need help?Do you have a question about the Sartorius LA420 and is the answer not in the manual?
Allows selection of the display language from multiple options.
Explains how to enter the correct date and time for accurate logging.
Provides instructions on how to move through the balance's setup menu.
Enables configuring balance functions by selecting predefined parameters in Setup.
Allows configuration of parameters like password, clock, and interfaces.
Enables configuration of the balance by selecting parameter options from a menu.
Guides users on how to configure printout formats and select data for printing.
Explains how to configure individual printout formats for various applications.
Describes the fundamental weighing process, taring, and printing weights.
Explains how to enter a password to block access to menus and functions.
Describes setting parameters for serial interface ports and external switches.
Describes the process for internal calibration using the balance's motorized weight.
Explains configuring the balance for auto-adjust or manual-adjust after calibration.
Guides on defining and performing external calibration with a user-specified weight.
Explains the automatic calibration function based on time or temperature changes.
Allows switching the display between two weight units by pressing a soft key.
Provides the mathematical formulas for calculating density using different methods.
Lists default parameters for weighing sequence, tare, autosave, and printout.
Explains how to generate printouts automatically or manually.
Explains the four sequences for measuring tare, initial, and backweights.
Explains how to change the weighing sequence directly during measurement.
Describes the four display pages (lots, samples, values, results) for viewing data.
Explains how to manually view and print display pages for lots, samples, values, and results.
Details technical specifications for specific LA models like readability and capacity.
To Next Page
General