Need help?Do you have a question about the Sartorius Master Pro LA620S and is the answer not in the manual?
General| Maximum Capacity | 620 g |
|---|---|
| Readability | 0.001 g |
| Calibration | External |
| Display | LCD |
| Power Supply | 100 – 240 V, 50/60 Hz |
| Linearity | ±0.002 g |
| Interface | RS232 |
| Repeatability | 0.001 g |
| Stabilization time (typical) | 2 seconds |
| Operating Temperature | +10°C to +40°C |
Information about performing repairs on Sartorius Masterpro balances and warranty implications.
Location and function of the balance's service and BPI switches.
Steps to enable BPI mode for calibration or PCB replacement.
Step-by-step guide to perform external linearization.
Performing internal span adjustment using the built-in weight.
Methods for external span adjustment.
Entering specific weights for span adjustment.
Enabling the service mode for advanced functions.
Detailed list of calibration and adjustment options in service mode.
Entering specific weights for external linearization.
Performing external span adjustment with stored weights.
Replacing the balance's internal calibration weight value.
Calibrating the balance using custom weights.
Testing the reproducibility of the built-in calibration weight.
Procedure to detach the display and control unit.
Accessing components in small single-casting or brass systems.
Accessing components in large single-casting block systems.
Methods to check preload using software or voltmeter.
How to change preload weights on different balance systems.
Procedure for checking span accuracy using certified weights.
Procedures for checking linearity based on balance resolution.
Linearity check for high-resolution and PolyRange balances.
To Next Page