Sartorius Master Pro LP6200 User Manual

W--5032-e03013
Q
U
A
L
I
T
Y
S
Y
S
T
E
M
C
E
R
T
I
F
I
E
D
Q
U
A
L
I
T
Y
S
Y
S
T
E
M
R
e
g
.
N
o
.
1
9
4
4
0
-
0
2
C
E
R
T
I
F
I
E
D
DIN EN ISO 9001
Sartorius AG, Weighing Technology
Sartorius AG, Weighing Technology
Sartorius Master
pro
Serie
Electronic Precision Balances
Service Manual
for LP / LA Models

Sartorius Master Pro LP6200 Specifications

General

Brand	Sartorius
Model	Master Pro LP6200
Category	Scales
Language	English

Summary

Overview of the User / Service SETUP Program

Service Switches

Access Switch

Activating the BPI Mode / Deactivating the Write Protection

Activating the Service Mode

Calibration/Adjustment in the Service Mode

Lists available calibration and adjustment options within service mode.

External Linearization

Manual Input of the Linearization Weights

Step-by-step guide to entering specific weight values.

Performing External Linearization

Internal Span Adjustment

External Span Adjustment

External Span Adjustment with Manual Input of Weight Values

Procedure for manual input of calibration weight for span adjustment.

External Span Adjustment with Stored Weight

Overwriting the Internal Calibration Weight

Calibration with a User-defined Weight

reproTEST

SETUP Program

Servicing the Weighing Cell

Removing the Display and Control Unit from the Weighing Cell

Steps to remove the display and control unit.

Opening the Weighing Cell (Small Single-Casting Block System, Brass System)

How to open the weighing cell for specific systems.

Opening the Weighing Cell (Large Single-Casting Block System)

Accessing the Main PCB

Opening the Display and Control Unit

Replacing the Built-in Calibration Weight

Calibration/Adjustment

Calibration/Adjustment Sequence

Order of checks for calibration and adjustment.

Prerequisites for Calibration/Adjustment

Ambient Conditions

Operating Conditions

Preload

Checking the Preload

Checking the Preload with the Service Software

Adjusting the Preload with a Digital Voltmeter

Adjustment Specifications

Adjusting the Preload

Reproducibility

Off-center Load

Checking the Off-center Load

Adjusting the Off-center Load

Masterpro Balances with the Small Single-Casting Block System

Masterpro Balances with the Brass System

Masterpro Balances with the Large Single-Casting Block System

Span Accuracy

Linearity

Checking the Linearity on Balances with Less Than 1,000,000 Digits

Checking the Linearity on Balances with More Than 1,000,000 Digits and PolyRange Balances

Repairing the Balance

Repairing the Weighing System

Advice on handling weighing system repairs.

Repairing the Electronics

Instructions for repairing electronic components.

Replacing the PCB in the Display and Control Unit

Steps to replace the PCB in the display/control unit.

Replacing the Display and Control Unit, Backlighting Module, Keypad Overlay

Replacing the Balance PCB

Masterpro Balances with the Small Single-Casting Block System or Brass System

Masterpro Balances with the Large Single-Casting Block System

Balance Operating Menu Codes Masterpro LP

Balance Operating Menu Codes Masterpro LA

Service Specifications Sheet 1

Service Specifications Sheet 2