Need help?Do you have a question about the Sartorius Master Pro LP2200S and is the answer not in the manual?
General| Capacity | 2200 g |
|---|---|
| Readability | 0.01 g |
| Weighing Principle | Electromagnetic force compensation |
| Display | LCD |
| Repeatability | 0.01 g |
| Linearity | ± 0.02 g |
| Calibration | External |
| Weight | 3.5 kg |
| Interface | RS232 |
| Power Supply | AC 100-240 V, 50/60 Hz |
| Stabilization time (typical) | 2.0 s |
| Operating Temperature | 10 °C to 40 °C |
Steps to enable BPI mode for calibration/adjustment.
Lists the available calibration and adjustment options within the service mode.
Detailed steps for manually entering linearization weights.
Steps to program linearization weights manually.
Steps to execute the external linearization process.
Steps to perform external linearization using entered weights.
Procedure for performing internal span adjustment using the built-in weight.
Detailed procedure for internal span adjustment.
Procedure for entering the calibration weight for span adjustment.
How to input calibration weight for span adjustment.
Procedure to overwrite the internal calibration weight after service.
Steps to overwrite the internal calibration weight.
Explanation of the expanded functions available in service mode.
Detailed list of calibration and adjustment procedures in service mode.
How to define and use a custom weight for calibration.
Detailed instructions for replacing the internal calibration weight.
Method to check preload using service software.
To Next Page