Sartorius Master Pro LP6200S User Manual

W--5032-e03013
Q
U
A
L
I
T
Y
S
Y
S
T
E
M
C
E
R
T
I
F
I
E
D
Q
U
A
L
I
T
Y
S
Y
S
T
E
M
R
e
g
.
N
o
.
1
9
4
4
0
-
0
2
C
E
R
T
I
F
I
E
D
DIN EN ISO 9001
Sartorius AG, Weighing Technology
Sartorius AG, Weighing Technology
Sartorius Master
pro
Serie
Electronic Precision Balances
Service Manual
for LP / LA Models

Sartorius Master Pro LP6200S Specifications

General

Brand	Sartorius
Model	Master Pro LP6200S
Category	Scales
Language	English

Summary

Operating the Balance

Key Functions

Description of primary balance key functions like ON/OFF, Tare, Print, Setup.

SETUP Program

Overview of the User / Service SETUP Program

Service Switches

Activating the BPI Mode / Deactivating the Write Protection

Steps to activate BPI mode for calibration/adjustment or PCB replacement.

Activating the Service Mode

Calibration/Adjustment in the Service Mode

Lists available calibration and adjustment options within the service mode.

External Linearization

Manual Input of the Linearization Weights

Procedure to manually enter calibration weights for linearization.

Performing External Linearization

Internal Span Adjustment

External Span Adjustment

Methods for performing external span adjustment.

External Span Adjustment with Manual Input of Weight Values

Procedure to input custom weights for external span adjustment.

External Span Adjustment with Stored Weight

Overwriting the Internal Calibration Weight

Procedure to overwrite the internal calibration weight after service.

Calibration with a User-defined Weight

Servicing the Weighing Cell

Removing the Display and Control Unit from the Weighing Cell

Steps to safely remove the display and control unit assembly.

Opening the Weighing Cell (Small Single-Casting Block System, Brass System)

Procedure to open the weighing cell for small single-casting or brass systems.

Opening the Weighing Cell (Large Single-Casting Block System)

Accessing the Main PCB

Opening the Display and Control Unit

Replacing the Built-in Calibration Weight

Procedure for replacing the balance's internal motorized calibration weight.

Calibration/Adjustment

Calibration/Adjustment Sequence

Sequence of factors to check and adjust during calibration.

Prerequisites for Calibration/Adjustment

Adjustment Specifications

Reproducibility

Off-center Load

Adjusting the Off-center Load

Masterpro Balances with the Brass System

Masterpro Balances with the Large Single-Casting Block System

Span Accuracy

Linearity

Checking the Linearity on Balances with Less Than 1,000,000 Digits

Checking the Linearity on Balances with More Than 1,000,000 Digits and PolyRange Balances

Replacing the Display and Control Unit, Backlighting Module, Keypad Overlay

Replacing the Balance PCB

Masterpro Balances with the Small Single-Casting Block System or Brass System

Masterpro Balances with the Large Single-Casting Block System