Information and Printouts or Data Transfer
The info key (i) has two functions:
– one brief press: displays information and prints/transfers stored data
– one long press: recalls the reference percentage or reference sample
quantity for weighing in percent or counting (for more
information, see the descriptions of these programs)
Briefly press the i key to select the information
function: an “i” will appear in the display.
If you press f or F now, the data stored in
the memory will be retrieved and displayed. What is
displayed depends on the program selected.
Example: Counting
Readout: Reference sample quantity
Readout: Reference sample weight
These data will also be output via the interface (printed
or transferred) if you press the p key after pressing
the info key. In this case, the print symbol will be
displayed next to the “i” until you press a function key.
For information on printouts or data transfer, see “Utilities” in Part 2. In the examples
in Part 4, the data that are output via the interface are printed on hard copy.
Info + print + function key → displays and prints data stored
Info + function key → displays data stored in the memory
Data output only for
Code 7 2 2
nRef + xxxxxxx pcs
wRef + xxxxxxx g
4–3
To Next Page
Loading...
Need help?
General