Taring
A weight can be accurately measured only from
a defined zero point. Press one of the two t keys (10)
to zero the display. You can tare the display within
the entire weighing range.
Weighing
Place your sample on the weighing pan (1) to
determine the weight. Read off the weight indicated
in the display (6) only once the weight unit/stability
symbol (“g”, “kg” or a different unit as selected – see
Part 2, “Balance Operating Menu”) is indicated.
Important Note Concerning Verified
Balances/Scales of Accuracy Class k
To avoid measuring errors, the respective air density
must be allowed for. The following formula is used to
calculate the mass of the sample:
1– ρ
L
/8000 kg m
–3
m = n
w
1– ρ
L
/ρ
m = mass of the sample
n
w
= weight readout
ρ
L
= air density during weighing
ρ = density of the sample
Important Note Concerning Verified
Balances/Scales Approved for Use as Legal
Measuring Instruments in the EU:
The small circle on the left in the weight display
shows that the balance/scale has been exactly
tared to “0” (±0.25 of a scale interval).
1–16
To Next Page
Loading...
Need help?
General